Running the Design in Hardware - 2025.2 English - XD100

To run the design and observe the traces from the ILAs, open Vivado.

1. Prepare the VCK190 by connecting the UART/JTAG USB cable to your compute and set the boot mode to JTAG.

2. Power on the VCK190.

3. Open Vivado and open the Vivado HW manager.

4. Connect to the target and program the device using the generated BOOT.BIN (Vitis/workspace_4/system_project/build/hw/package/package/BOOT.BIN) and use the .ltx file from the V++ linker generated Vivado project (Vitis/workspace_3/system_project/build/hw/hw_link/binary_container_1/binary_container_1/vivado/vpl/prj/prj.runs/impl_1/debug_nets.ltx).

5. Open the ILA view and run auto trigger. You should see activity going in and out of the AI Engine

---