[shell]% cd <path-to-design>/02-Prime-Factor-FFT
[shell]% make all TARGET=hw_emu
This will take about 90 minutes to run the first time as the build will perform C/RTL verification and Vivado out-of-context place-and-route runs for all six HLS IPs. This will only be done once, but is not strictly required for hardware emulation. To skip this step, alternately run using the following:
[shell]% cd <path-to-design>/02-Prime-Factor-FFT
[shell]% make all TARGET=hw_emu DO_COSIM=false
The build process will generate a folder 02-Prime-Factor-FFT/package containing all the files required for hardware emulation. This can be run as shown below. An optional -g can be applied to the launch_hw_emu.sh command to launch the Vivado waveform GUI to observe the top-level AXI signal ports in the design.
[shell]% cd <path-to-design>/02-Prime-Factor-FFT/package
[shell]% ./launch_hw_emu.sh -run-app embedded_exec.sh