This page enables you to run checks on different parameters such as Check Clocks, IDCODE
Check, EBM EEPROM Check, DIMM EEPROM Check, and Check
Voltages.
Figure 1. Board Interface Test Page
As the checks are run, progress bars indicate status with different colors
defined as follows.
Figure 2. Board Interface Test Status
- Check Clocks and Check Voltages test if clock and voltage parameters are working properly (Success or Fail).
- IDCODE Check, EBM EEPROM Check, and DIMM EEPROM Check test if these parameters are working properly (Success or Fail).