Set or modify the Tuning Mode, Control Mode, and EXPO controls to tune all your hardware at once using the System settings tab.
Tuning Mode
The available tuning modes are:
- Default
- Auto Overclock: Is a combination of PBO Advanced and EXPO (if supported).
- Custom: Available only if you select Eco Mode, AMD Spec, PBO, PBO Advanced, or Manual as the Control mode.
Control Mode
Use these settings to control CPU operation mode. Available modes are:
- Default: You can change the system value to stock values only in this mode.
- Eco Mode: You can perform all supported operations except changing CPU frequency, Peak Core(s) Voltage, PPT, TDC, EDC limits, and changing control mode.
- AMD Spec: Enables you to adjust PBO parameters (PPT, TDC, EDC) up to but not exceeding the AMD spec limits.
- PBO: The Precision Boost Overdrive mode allows the processor to run beyond the default infrastructure limits up to the limits of the board to potentially achieve higher sustained frequencies.
- PBO Advanced: Sets a maximum boost frequency higher than the stock frequency.
- Manual: Changing Control Mode to Manual will require additional settings to be made and you will be redirected to CPU Tuning settings. There, you can manually adjust the frequency, voltage and other parameters in a precise and direct manner to overclock.
Apply/Discard Changes or Save As a Profile
To save your changes, click Apply.
Based on the Tuning Mode selected, you will have to confirm these additional changes:
- Default: If the currently applied mode is any mode other than default, the Apply & Save pop-up appears with information that the current mode will be set to Default. Click Apply Changes to apply the changes displayed in the pop-up.
- PBO: The Apply & Save pop-up appears with information that the Mode, PPT, TDC, and EDC values will be set to the values displayed. You cannot change these values but only accept the values displayed. Click Apply Changes to apply the changes displayed in the pop-up.
- PBO Advanced: The Apply & Save pop-up appears with information that the Mode, PPT, TDC, EDC, Boost Override CPU, and PBO Scalar values will be set to the values displayed. You cannot change these values but only accept the values displayed. Click Apply Changes to apply the changes displayed in the pop-up.
- Manual: See CPU.
If you select Apply & Test you can apply the current profile and run Test as configured in Settings page.
Click Discard to discard your changes.
Click Save As A Profile to save these changes as a separate profile or overwrite an existing profile.
To save these changes as a new profile, select the Add a new profile option and optionally write a brief description and click Save in the Save As A Profile pop-up.
To overwrite an existing profile, select the Overwrite an existing profile option and select the profile to overwrite from the drop-down list. Click Save.
To continue tuning, click CPU from the left navigation pane.