You can click the kebab menu (three vertical dots) on the top right side of the application to access the Reset System Hardwares, Stress Test, Set All Auto, and Set All Custom options. These options are available in all the three tabs of the navigation pane under Tuning.
Reset Hardware
To reset system, CPU, or RAM hardware, click the kebab menu and select Reset <option> Hardwares. On the System tab, this option is named Reset System Hardwares, while on the CPU and RAM tabs, it is named Reset CPU Hardware and Reset RAM Hardware, respectively.
A message appears informing you that the tuning settings will be lost and that action will apply default settings to all hardware (CPU and RAM); changes also will be made to BIOS settings; consider saving current settings as a profile before proceeding.
If you want to proceed, click Restart. A system restart will be required for these settings to take effect.
Stress Test
You can perform a hardware stress test at the system, CPU or RAM level. From the kebab menu, select Stress Test. From the Hardware list, select the System, CPU, or RAM option.
Select the Stress Test Duration. Set the required duration within these limits: 10 to 600 seconds in step size of 1. Note that this process may cause your system to crash or reboot, and your display to flicker. To continue, click Start.
Set All Auto
Use this option to configure all memory parameters to Automatic mode. In this state, the parameters are managed by the system and you cannot manually modify them. Ideal for users who prefer system-optimized settings without manual interference.
Set All Custom
Use this option to switch all memory parameters to Manual mode, enabling you to customize and fine-tune individual memory values according to your preferences or performance requirements. This mode is recommended for advanced users seeking fine-tuned control over memory settings.