The common features of the PC-CFR core and individual configuration features of both implementations of PC-CFR (using PL resources only and using DFE-CFR + PL resources) are as follows:
•Support for multiple air interface standards.
•Smart Peak Processing mode for supporting wide transmit bandwidth up to 400 MHz, processes incoming samples at >1.2 times instantaneous bandwidth (iBW) reducing resource utilization.
•Support for power and frequency dynamics.
For additional features see Features (cont.).
|
LogiCORE IP Facts Table |
|
|---|---|
|
Core Specifics |
|
|
Supported Device Family(1) |
Zynq® UltraScale+™ RFSoC DFE UltraScale™ Architecture 7 series FPGAs |
|
Supported User Interfaces |
AXI4-Stream, AXI4-Lite |
|
Provided with Core |
|
|
Design Files |
Encrypted RTL |
|
Example Design |
Not Provided |
|
Test Bench |
VHDL |
|
Constraints File |
Vivado XDC |
|
Simulation Model |
VHDL and Verilog Structural Simulation Model MATLAB® Model available |
|
Supported |
CFR Reference Design available at www.xilinx.com/products/intellectual-property/ef-di-pc-cfr.html |
|
Tested Design Flows(2) |
|
|
Design Entry |
Vivado® Design Suite |
|
Simulation |
For supported simulators, see the |
|
Synthesis |
Vivado Synthesis |
|
Support |
|
|
Release Notes and Known Issues |
Master Answer Record: 54486 |
|
All Vivado IP Change Logs |
Master Vivado IP Change Logs: 72775 |
|
Notes: 1.For a complete listing of supported devices, see the Vivado IP catalog. 2.For the supported versions of the tools, see the |
|