Pin Assignment Tab - 5.4 English

MIPI CSI-2 Receiver Subsystem LogiCORE IP Product Guide (PG232)

Document ID
Release Date
5.4 English

The Pin Assignment tab page allows to select pins. The subsystem pin assignment configuration screen is shown in the following figure.

Note: This tab is not available for 7 series device configurations.
Figure 1. Subsystem Customization Screen - Pin Assignment
HP IO Bank Selection
Select the HP I/O bank for clock lane and data lane implementation.
Clock Lane
Select the LOC for clock lane. This selection determines the I/O byte group within the selected HP I/O bank.
Data Lane 0/1/2/3
Displays the Data lanes 0, 1, 2, and 3 LOC based on the clock lane selection.