To enable any of the Tandem
Configuration capabilities for AMD UltraScale™
devices,
select the appropriate AMD Vivado™
IP catalog option
when customizing the subsystem. In the Basic
tab:
- Change the Mode to Advanced.
- Change the Tandem Configuration or Dynamic Function eXchange option according
to your particular case:
- Tandem
- For Tandem PROM, Tandem PCIe or Tandem PCIe + Dynamic Function eXchange use cases.
- Tandem with Field Updates
- ONLY for the predefined Field Updates use case.
- DFX over PCIe
- To enable the MCAP link for Dynamic Function eXchange, without enabling Tandem Configuration.
Figure 1. Tandem Configuration or Dynamic Function eXchangeOptions for UltraScale Devices
For complete information about Tandem Configuration, including required PCIe block locations, design flow examples, requirements, restrictions and other considerations, see Tandem Configuration in the UltraScale Devices Gen3 Integrated Block for PCI Express LogiCORE IP Product Guide (PG156).