Subsystem Configuration Screen - 3.0 English

DisplayPort 1.4 TX Subsystem Product Guide (PG299)

Document ID
Release Date
3.0 English

The subsystem configuration screen is shown in the following figure.

Figure 1. Configuration Screen
Component Name
The Component name is used as the name of the top-level wrapper file for the core. The underlying netlist still retains its original name. Names must begin with a letter and must be composed from the following characters: a through z, 0 through 9, and "_". The name displayport_0 is used as internal module name and should not be used for the component name. The default is v_dp_txss1_0.
Selects the desired resolution for the video stream out. Options are SST or MST.
Video Interface
Selects the AXI4-Stream or native for the input video interface.
MST Streams
Selects the maximum number of streams in MST mode.
Lane Count
Selects the maximum number of lanes.
Bits Per Color
Selects the desired maximum bit per component (BPC).
Include Clocking Wizard
Link Rate
Selects the desired link rate in Gb/s.
Enable Support for YUV420 ColorFormat
Selects the YUV420 colorimetry. When YUV420 color format is selected, by default, SDP is enabled.
Input PPC with YUV420 Support
4 (default), 8. This option is enabled only when YUV420 is enabled and selecting 8 will enable 8K at 60 fps resolution.
Enable HDCP 1.3 Encryption
Enables the HDCP 1.3 encryption.
Enable HDCP 2.3 Encryption
Enables the HDCP 2.2/2.3 encryption.
Enable SDP including Audio
Enables the secondary data packet (SDP) support including audio.
Audio Channels
Selects the number of audio channels.
AUX I/O Buffer location
Selects the buffer location for AUX channel.