Enable logging of the waveform for the specified HDL objects by entering the following command in the Tcl Console:
log_wave [get_objects /testbench/dut/*] [get_objects /testbench/dut/U_SINEGEN/*]Note: See the
Vivado
Design Suite Tcl Command Reference Guide (UG835) for more information on the
log_wave command.This command enables signal dumping for the specified HDL objects, /testbench/dut/* and /testbench/dut/U_SINEGEN/*.
Note: * symbol specifies all the HDL objects
in a scope.
The
log_wave command writes the
specified signals to a waveform database, which is written to the simulation folder of
the current
project:<project_name>/<project_name>.sim/sim_1/behav/xsim