The Design Utilization Summary table provides the utilization for each RP and the static domain. The data in this table is based on resource information determined by the design floorplan, so this section of the Report DFX Summary output is only valid when a Pblock has been supplied for each reconfigurable partition (RP). The number of LUT1 buffers inserted in the static region is provided under the static utilization table. The number of LUT1 buffers inserted in the RP is provided in the RP details table.
Note: For more information about design utilization,
use the
report_utilization Tcl command.| Column | Description |
|---|---|
| Used | Number of resources used in the Pblock |
| Util % | Percentage of resources used out of the available resources in the Pblock |
| Pblock Available | Total resources available in the area defined by the Pblock |
| Pblock Avail % in Device | Portion of the total device resource included in the RP Pblock |
Figure 1. RP Utilization Table
| Column | Description |
|---|---|
| Used | Resources used in the static domain |
| Util % | Percentage of resources used in static |
| Static Available | Total resources available for the static domain excluding the sum of all resources of all RP Pblocks from the total available device resources |
| Static in Device % | Portion of total device resources available in the static domain |
Figure 2. Static Utilization Table
