When an AMD Vivado™
project is using a
reconfigurable module (RM) with a MicroBlaze design. The
tool automatically creates partial bitstream and .mmi
files for that section of the design. The creation is applied for both the current
module and the replacement module.
The updatemem command can be used the
same as any other project using the partial bit and .mmi
files.
updatemem -bit config_mb_i_hier_0_default_rm_1_partial.bit -out new_out.bit -meminfo config_mb_i_hier_0_default_rm_1_partial.mmi -data new_elf.elf -proc config_mb_i/hier_0/microblaze_0
Note: This flow also works with XPM files in the
reconfigurable blocks.
Important: Updatemem supports partial
bitstream for Non-Versal devices only