This section assumes that the following prerequisites are satisfied:
- You have installed PetaLinux Tools on the Linux workstation. If you have not installed it, see Installation Steps.
- You have installed PetaLinux BSP on the Linux workstation. See Creating a Project Using PetaLinux BSP, if you have not installed.
- You have successfully created BOOT.BIN with the newly built PetaLinux project. If you have not created it, see the Packaging Boot Image.
- A serial communication program such as minicom, kermit, or gtkterm has been installed. The baud rate of the serial communication program has been set to 115200 bps.