This section assumes that the following prerequisites are satisfied:
- The host environment with a TFTP server is set up, and a PetaLinux Image is built for TFTP boot. For more information, see Configuring TFTP/PXE Boot.
- You have packaged prebuilt images. For more information, see Packaging Prebuilt Images.
- A serial communication program such as minicom/kermit/gtkterm has been installed; the baud rate of the serial communication program has been set to 115200 bps.
- Ethernet connection is set up properly between Host and Linux Target.
- Appropriate JTAG cable drivers are installed.