BSP Packaging - 2024.1 English

Steps on how to package a project are as follows:

1. Navigate outside the PetaLinux project directory to run petalinux-package command.
2. Use the following commands to package the BSP.

   petalinux-package bsp -p <plnx-proj-root> --output MY.BSP
   

   This generates MY.BSP, including the following elements from the specified project:

   • <plnx-proj-root>/project-spec/
   • <plnx-proj-root>/config.project
   • <plnx-proj-root>/.petalinux/
   • <plnx-proj-root>/pre-built/
   • <plnx-proj-root>/.gitignore
   • <plnx-proj-root>/components