Using Tcl Commands to Take an IBERT Measurement - 2023.2 English

Vivado Design Suite User Guide: Programming and Debugging (UG908)

Document ID
UG908
Release Date
2023-10-19
Version
2023.2 English

Here is an example Tcl command script that interacts with the following example system

  • One KC705 board's Digilent JTAG-SMT1 cable (serial number 12345) accessible via a hw_server running on localhost:3121
  • Single IBERT core in a design running in the XC7K325T device on the KC705 board
  • IBERT core has Quad 117 and Quad 118 enabled