Adding Probes to the Waveform - 2023.2 English

Vivado Design Suite User Guide: Programming and Debugging (UG908)

Document ID
Release Date
2023.2 English

To add probes to the waveform, select the Probes to add for the associated ILA core in the Debug Probes window, right-click, and select Add Probes to Waveform from the pop-up menu.

To add another copy of a signal or bus to the Waveform window, select the signal or bus in the Waveform window. Select Edit > Copy or type Ctrl+C. This copies the object to the clipboard. Select Edit > Paste or type Ctrl+V to paste a copy of the object in the waveform.

You can do the same using the Tcl command add_wave as follows:

add_wave -into {hw_ila_data_1.wcfg} -radix hex { {counter1} }

In this example, probe counter1 is added to the Waveform Configuration window of hw_ila_1 and its display radix in the Waveform window is set to hex.