Reporting the Timing Exceptions Being Ignored - 2023.2 English

Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906)

Document ID
Release Date
2023.2 English
Another mode of operation of the Report Exception command is as follows:
report_exceptions -ignored

To illustrate, add the following timing exceptions on the top of the previous ones:

set_max_delay 5 -to [get_ports out5]
set_multicycle_path 1 -hold -to [get_cell int21_reg]
set_multicycle_path 2 -setup -to [get_ports out6]
set_false_path -from [get_cell int11_reg] -to [get_cell int20_reg]

All those exceptions are either already covered by a timing exception from the previous section (reporting the timing exceptions affecting the timing analysis) or target a non-existing path (there is no physical connection between the registers int11_reg and int20_reg).

After adding these four constraints, the Timing Constraints window looks like the following figure.

Figure 1. Timing Constraints Window

The Exceptions Report (report_exceptions -ignored) is as shown in the following figure:

Figure 2. Exceptions Report

Note: The Status column provides some explanations why the timing exceptions are being ignored.