Timing Constraints Wizard - 2023.2 English

Vivado Design Suite User Guide: Using Constraints (UG903)

Document ID
UG903
Release Date
2023-11-01
Version
2023.2 English

The Timing Constraints Wizard identifies missing timing constraints on a synthesized or implemented design. It analyzes the netlist, the clock nets connectivity, and the existing timing constraints to provide recommendations as per the UltraFast Design Methodology Guide for FPGAs and SoCs (UG949). Three categories of constraints are covered by the following 11 pages of the wizard, followed by a summary. The following steps are included:

  • Clocks
    • Primary clocks
    • Generated clocks
    • Forwarded clocks
    • External feedback delays
  • Input and output ports
    • Input delays
    • Output delays
    • Combinatorial delays
  • Clock domain crossing
    • Physically exclusive clock groups
    • Logically exclusive clock groups with no interaction
    • Logically exclusive clock groups with interaction
    • Asynchronous clock domain crossings
  • Constraints summary

During each step, you can accept the recommended constraints or modify the list by checking or unchecking each of the proposed constraints. However, unchecking recommended constraints early in the wizard can prevent the identification of other missing constraints in subsequent steps. For example, if you decide to skip the creation of a clock, the wizard does not identify and recommend any constraints that refer to this clock or its auto-derived clocks.

The final page of the wizard provides a summary of the constraints that are created. You can click on each individual hyperlink to see the constraints details, or visualize the new constraints in the Timing Constraints window after exiting the wizard.

You can also choose to generate the following recommended reports upon clicking Finish to verify that the design is completely and properly constrained:

Create Timing Summary report
Timing slack is reported with the new constraints, in addition to a check_timing report. Timing violations likely display if the period or I/O delay constraints that you entered are too difficult.
Create Check Timing report
This report identifies missing or inappropriate constraints by running the check_timing command.
Create DRC Report using only Timing Checks
This report runs the Timing DRCs.
Important: The newly added constraints are automatically saved to the Target XDC file unless you click Cancel. You can edit or delete the new constraints in the Timing Constraints window after exiting the wizard.

The Timing Constraint Wizard does not recommend a constraint if it introduces unsafe timing analysis. Also, the wizard does not fix inappropriate constraints that already existed when loading the design in memory. Nevertheless, some invalid constraints might become valid after creating all the missing clocks when using Vivado Design Suite in project mode. For more details, see Constraints Processing Order and Invalid Constraints below. Also, after using the wizard, if check_timing or report_drc still flag some constraints issues, it is usually due to a constraint problem that already existed in the source XDC files. Address these problems directly instead of using the wizard to resolve them.

Video: For more information on the Vivado Timing Constraints Wizard, see Vivado Design Suite QuickTake Video: Using the Vivado Timing Constraint Wizard.