Navigating Content by Design Process - 2023.2 English

Vivado Design Suite User Guide: I/O and Clock Planning (UG899)

Document ID
Release Date
2023.2 English

AMD Adaptive Computing documentation is organized around a set of standard design processes to help you find relevant content for your current development task. All AMD Versal™ adaptive SoC design process Design Hubs and the Design Flow Assistant materials can be found on the website. This document covers the following design processes:

System and Solution Planning
Identifying the components, performance, I/O, and data transfer requirements at a system level. Includes application mapping for the solution to PS, PL, and AI Engine.

The following table summarizes various interface speed options available in each architecture for easy document navigation. Note that the bit-rates mentioned in the table are based on hardware characterization using LVDS in speed grade -3 devices.

Table 1. Navigating IP and Clock Planning Content
Device Architecture Additional Considerations Relevant Links
7 series HRIO (Low Speed I/O)
  • Bit-rate range 0 to 1250 Mbps
HPIO (High Speed I/O)
  • Bit-rate range 0 to 1600 Mbps
AMD UltraScale™ /AMD UltraScale+™ Component Mode (Low Speed I/O)
  • Bit-rate range for AMD UltraScale™ HP/HR bank or AMD UltraScale+™ HP bank 0-1250 Mbps
  • Bit-rate range for AMD UltraScale+™ HD bank 0-250 Mbps
Native Mode (High Speed I/O)
  • Bit-rate range 300 to 1600 Mbps (only HP banks)
AMD Versal™ adaptive SoC I/O Logic (Low Speed I/O)
  • Bit-rate range 0-300 Mbps (Both HD and XP banks)
XPIO (High Speed I/O)
  • Bit-rate range 200-1800 Mbps (Only XP banks)