Update the SmartLynq firmware image
Syntax
update_hw_firmware [‑file_path <arg>] [‑config_path <arg>] [‑skip_update]
[‑reset] [‑format] [‑flash] [‑quiet] [‑verbose] [<hw_server>]Usage
| Name | Description |
|---|---|
[-file_path]
|
Optional path to BOOT.BIN file Default: Use default BOOT.BIN |
[-config_path]
|
Optional path to config.ini file Default: No config.ini updated |
[-skip_update]
|
Skip writing the BOOT.BIN to the SmartLynq |
[-reset]
|
Reset the SmartLynq cable after any other operations to complete the update and disconnects the hw_server |
[-format]
|
Format the SmartLynq cable EMMC prior to any other operations. Any files on SmartLynq cable will be lost. |
[-flash]
|
Flash the SmartLynq cable QSPI. This updates the primary FSBL and Safe Mode images. |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<hw_server>]
|
hardware server Default: current hardware server |