create_hw_cfgmem - 2023.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
Release Date
2023.2 English

Read cfgmem file into memory


create_hw_cfgmem ‑hw_device <arg> [‑quiet] [‑verbose] <mem_device>


Name Description
-hw_device hw_device object with which to associate hw_cfgmem object
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
<mem_device> name of flash memory device as returned by get_cfgmem_parts




Create a hw_cfgmem object associated with the specified hw_device.

The process whereby the bitstream data is loaded or programmed into the Xilinx® FPGA is called configuration. Configuration is designed to be flexible to accommodate different application needs and, wherever possible, to leverage existing system resources to minimize system costs.

AMD FPGAs are configured by loading design-specific configuration data, in the form of a bitstream file, into the internal memory of the hw_device. The hw_cfgmem defines a flash memory device used for configuring and booting the AMD FPGA device. Once the hw_cfgmem object is created, and associated with the hw_device, the configuration memory can be programmed with the bitstream and other data using the program_hw_cfgmem command.

The hw_cfgmem object is associated with the specified hw_device object through the PROGRAM.HW_CFGMEM property on the device object. Use the get_hw_cfgmems command to work with the hw_cfgmem object, or use the get_property command to obtain the object from the hw_device:

get_property PROGRAM.HW_CFGMEM [current_hw_device]
Tip: When creating a new hw_cfgmem object, you can also associate the object with a Tcl variable as shown in the example below. By referring to the variable, you can set properties on the object, and use the object with other Tcl commands like program_hw_cfgmem or readback_hw_cfgmem.

This command returns the created hw_cfgmem object, or returns an error if it fails.


-hw_device <arg> - (Required) Specify the hw_device object to associate the memory configuration device with. The hw_device must be specified as an object as returned by the get_hw_devices command or current_hw_device command.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<mem_device> - (Required) Specify the flash memory device to use for configuring the associated hw_device. The configuration memory must be specified as a cfgmem_part object object using the get_cfgmem_parts command.

Note: The COMPATIBLE_PARTS property of the cfgmem_part object identifies which Xilinx devices a configuration memory is compatible with.


The following example:

  1. Gets the PART associated with the current_hw_device.
  2. Gets a list of cfgmem_parts that are compatible with the device part.
  3. Uses one of the compatible parts to create a new hw_cfgmem object.
  4. Sets the PROGRAM.FILE property of the current hw_cfgmem object to the cfgmem file created with the write_cfgmem command.
  5. Programs the current hw_cfgmem object.
set devPart [get_property PART [current_hw_device]]
set cfgParts [get_cfgmem_parts -of [get_parts $devPart]]
create_hw_cfgmem -hw_device [current_hw_device] [lindex $cfgParts 0 ]
set_property PROGRAM.FILE {C:/Data/cfgmem_file.mcs} [current_hw_cfgmem]
program_hw_cfgmem [current_hw_cfgmem]