Primitive: Multi-Output Clock Buffer with an enable and divide function
- PRIMITIVE_GROUP: CLOCK
- PRIMITIVE_SUBGROUP: BUFFER
Introduction
Multi-Output clock buffer
Port Descriptions
Port | Direction | Width | Function |
---|---|---|---|
CE | Input | 1 | Buffer enable input. |
CLR | Input | 1 | Asynchronous clear function forcing the output value to zero. |
CLRB_LEAF | Input | 1 | Active low clear of BUFDIV_LEAF |
I | Input | 1 | Buffer input. |
O1 | Output | 1 |
Note: Setting the BUFGCE_DIVIDE attribute to a value other than 1 will result in futher division of the output clock by that factor.
|
O2 | Output | 1 |
Note: Setting the BUFGCE_DIVIDE attribute to a value other than 1 will result in futher division of the output clock by that factor.
|
O3 | Output | 1 |
Note: Setting the BUFGCE_DIVIDE attribute to a value other than 1 will result in futher division of the output clock by that factor.
|
O4 | Output | 1 |
Note: Setting the BUFGCE_DIVIDE attribute to a value other than 1 will result in futher division of the output clock by that factor.
|
Design Entry Method
Instantiation | Yes |
Inference | No |
IP and IP Integrator Catalog | No |
Available Attributes
Attribute | Type | Allowed Values | Default | Description |
---|---|---|---|---|
BUFGCE_DIVIDE | DECIMAL | 1, 2, 3, 4, 5, 6, 7, 8 | 1 | Divide value. |
CE_TYPE | STRING | "SYNC", "HARDSYNC" | "SYNC" | Specifies the CE operation |
HARDSYNC_CLR | STRING | "FALSE", "TRUE" | "FALSE" | Specifies use of the internal synchronization circuit |
MODE | STRING | "PERFORMANCE", "POWER" | "PERFORMANCE" |
Sets the mode of operation that determines the output clock generation.
For PERFORMANCE MODE, the outputs are generated as follows:
For POWER MODE, the outputs are generated as follows:
Note: Setting the BUFGCE_DIVIDE attribute to a value other than 1 will result in futher division of the output clock by that factor.
|
Programmable Inversion Attributes: Specifies whether or not to use the optional inversions are to be used on specific pins for this component to change the active polarity of the pin function. When set to 1, it changes the function to behave active-Low rather than active-High. If an external inverter is specified on one of these associated pins, the Vivado Design Suite will automatically set this attribute during the opt_design stage so that additional logic is not necessary for changing the input polarity. | ||||
IS_CE_INVERTED | BINARY | 1'b0 to 1'b1 | 1'b0 | Specifies whether or not to use the optional inversion on the CE pin of this component. |
IS_CLR_INVERTED | BINARY | 1'b0 to 1'b1 | 1'b0 | Specifies whether or not to use the optional inversion on the CLR pin of this component. |
IS_I_INVERTED | BINARY | 1'b0 to 1'b1 | 1'b0 | Specifies whether or not to use the optional inversion on the I pin of this component. |
VHDL Instantiation Template
Unless they already exist, copy the following
two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;
-- MBUFGCE_DIV: Multi-Output Clock Buffer with an enable and divide function
-- Versal Premium series
-- Xilinx HDL Language Template, version 2023.2
MBUFGCE_DIV_inst : MBUFGCE_DIV
generic map (
BUFGCE_DIVIDE => 1, -- 1-8
CE_TYPE => "SYNC", -- HARDSYNC, SYNC
HARDSYNC_CLR => "FALSE", -- FALSE, TRUE
MODE => "PERFORMANCE", -- PERFORMANCE, POWER
-- Programmable Inversion Attributes: Specifies built-in programmable inversion on specific pins
IS_CE_INVERTED => '0', -- Optional inversion for CE
IS_CLR_INVERTED => '0', -- Optional inversion for CLR
IS_I_INVERTED => '0' -- Optional inversion for I
)
port map (
O1 => O1, -- 1-bit output: Buffer
O2 => O2, -- 1-bit output: Buffer
O3 => O3, -- 1-bit output: Buffer
O4 => O4, -- 1-bit output: Buffer
CE => CE, -- 1-bit input: Buffer enable
CLR => CLR, -- 1-bit input: Asynchronous clear
CLRB_LEAF => CLRB_LEAF, -- 1-bit input: Active low clear
I => I -- 1-bit input: Buffer
);
-- End of MBUFGCE_DIV_inst instantiation
Verilog Instantiation Template
// MBUFGCE_DIV: Multi-Output Clock Buffer with an enable and divide function
// Versal Premium series
// Xilinx HDL Language Template, version 2023.2
MBUFGCE_DIV #(
.BUFGCE_DIVIDE(1), // 1-8
.CE_TYPE("SYNC"), // HARDSYNC, SYNC
.HARDSYNC_CLR("FALSE"), // FALSE, TRUE
.MODE("PERFORMANCE"), // PERFORMANCE, POWER
// Programmable Inversion Attributes: Specifies built-in programmable inversion on specific pins
.IS_CE_INVERTED(1'b0), // Optional inversion for CE
.IS_CLR_INVERTED(1'b0), // Optional inversion for CLR
.IS_I_INVERTED(1'b0) // Optional inversion for I
)
MBUFGCE_DIV_inst (
.O1(O1), // 1-bit output: Buffer
.O2(O2), // 1-bit output: Buffer
.O3(O3), // 1-bit output: Buffer
.O4(O4), // 1-bit output: Buffer
.CE(CE), // 1-bit input: Buffer enable
.CLR(CLR), // 1-bit input: Asynchronous clear
.CLRB_LEAF(CLRB_LEAF), // 1-bit input: Active low clear
.I(I) // 1-bit input: Buffer
);
// End of MBUFGCE_DIV_inst instantiation
Related Information
- Versal Adaptive SoC Clocking Resources Architecture Manual (AM003)