Main Page - 2023.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
Release Date
2023.2 English

The main view has the following options:

Launch Config Name
You can specify the configuration name
Target Connection
In the connection field, you can select a target or create a target connection by clicking New in the connection field.
Target Setup Mode
You can select a standalone debug or attach a running target.
Bitstream File
You can specify the bit file by browsing to corresponding directory
Board Initialization
You can use the FSBL to initialize the board or use Tcl to initialize the board.
FSBL file
Specify the FSBL file to do initialization
FSBL Exit Function
Specify the FSBL exit function
Init With FSBL
Use FSBL to initialize the PS.
Reset Entire System
Perform a system reset if there is only one processor in the system
Reset APU
Reset all the APU cores
Reset RPU
Reset all the RPU cores
Enable RPU Split Mode
Put RPU cores in split mode so that they can be used independent of each other
Program Device
Allow tool to program the bit file to the device
Enable Cross Triggering
Enable the cross trigger function
Figure 1. Launch Configuration Window

Note: The summary of this launch configuration file is displayed at the bottom.