The following are the
commands followed by their options (if any) and the Python method for the option (if
any).
tfile close
- handle = <file_handle>
-
tfile = s.tfile() tfile.ls('/tmp') handle = tfile.open('/tmp/tfile_test.txt', flags=0x0F) tfile.write(handle, 'hi, this is a test string') print(tfile.read(handle, size=5)) fstat = tfile.fstat(handle) print(fstat) tfile.close(handle)
tfile copy
- src = <src_file>, dest = <dest_file>
-
--owner (-o) Copy owner information. --permissions (-p) Copy permissions.
tfile fsetstat
- handle = <file_handle>, file_attr
-
handle = tfile.open('/tmp/tfile_test.txt', flags=0x0F) tfile.write(handle, 'hi, this is a test string') print(tfile.read(handle, size=5)) fstat = tfile.fstat(handle) fstat.permissions = 65535 tfile.fsetstat(handle, fstat)
tfile fstat
- handle = <file_handle>
-
handle = tfile.open('/tmp/tfile_test.txt', flags=0x0F) tfile.write(handle, 'hi, this is a test string') print(tfile.read(handle, size=5)) fstat = tfile.fstat(handle)
tfile ls
- path = <dir_path>
-
tfile.ls('/tmp')
file lstat
- path = <link>
-
lstat = tfile.lstat('/tmp/rigel.txt')
tfile mkdir
- path = <dir_path>
-
tfile.mkdir('/tmp/new')
tfile open
- flags = <flags>
-
read mode = 0x00000001 -
write mode = 0x00000002 -
append mode = 0x00000004 -
create mode= 0x00000008 -
trunc mode = 0x00000010 -
excl mode= 0x00000020 -
tfile.open('/tmp/tfile_test.txt', flags=0x0F)
tfile opendir
- path = <dir_path>
-
f = tfile.opendir('/tmp')
tfile read
- handle, size
-
handle = tfile.open('/tmp/tfile_test.txt', flags=0x0F) tfile.write(handle, 'hi, this is a test string') print(tfile.read(handle, size=5))
tfile readdir
- handle = <dir_handle>
-
f = tfile.opendir('/tmp') print(tfile.readdir(f))
tfile readlink
- path = <file_path>
-
print(tfile.readlink('/tmp/rigel1.txt'))
tfile realpath
- path = <file_path>
-
print(tfile.realpath('/tmp/../tmp/rigel.txt'))
tfile remove
- path = <file_path>
-
tfile.remove('/tmp/rigel.txt')
tfile rename
- old_path, new_path
-
tfile.rename('/tmp/tfile_test.txt', '/tmp/rigel.txt')
tfile rmdir
- path = <dir_path>
-
tfile.rmdir('/tmp/new')
tfile roots
print(tfile.roots())tfile setstat
- path = <file_path>, attr = <file_attr>
-
stat = tfile.stat('/tmp/rigel.txt') print(stat) stat.permissions = 65535 tfile.setstat('/tmp/rigel.txt', stat)
tfile stat
- path = <file_path>
-
lstat = tfile.stat('/tmp/rigel.txt')
file symlink
- link = <link_path>, target = <target_path>
-
tfile.symlink('/tmp/rigel1.txt', '/tmp/rigel.txt')
tfile user
print(tfile.user())tfile write
- handle <file_handle>, data
-
Optional: offset=<offset> The offset (in bytes) relative to the beginning of the file from where to start writing. Default is 0. pos=<pos> Offset in *data* to write. Default is 0. size=<size> Number of bytes to write.Default is length of *data*