Design Rule Check Options - 2023.2 English

Vitis Unified Software Platform Documentation: Application Acceleration Development (UG1393)

Document ID
UG1393
Release Date
2023-12-13
Version
2023.2 English

The AI Engine mapper and router support configuring a list of Design Rule Checks (DRCs). The DRC commands shown below should be entered into the config file outside of any heading ([AIE] for instance).

drc.disable

Disable the DRC rule check for the specified ID. A disabled check is not executed.

drc.disable=AIE-ROUTER-3
drc.enable

Enable a previously disabled DRC rule check for the specified ID.

drc.enable=AIE-ROUTER-3
drc.severity

Change the severity of a DRC rule check. The format of the argument is <ID>:<severity>[:context]

Where:

  • <ID> is the DRC rule ID which can be found on DRC messages reported by the tool.
  • <severity> represents the new severity to assign to the specified ID.
  • [context]
drc.severity=AIE-ROUTER-3:warning
drc.waive

Waive the Design Rule Check for the specified ID. A waived check is still performed, but marked as waived, meaning that you don't care about this specific check for some reason.

drc.waive=AIE-ROUTER-3