Platform Management Controller Pins - 2023.2 English

Versal Adaptive SoC Hardware, IP, and Platform Development Methodology Guide (UG1387)

Document ID
UG1387
Release Date
2023-11-15
Version
2023.2 English

To design an efficient system, you must choose the device boot mode that best matches the system requirements. Each boot mode uses a different set of Platform Management Controller (PMC) pins. Factors to consider include the following:

  • Review PMC dedicated, PMC multiplexed I/O (MIO) pins, and PL extended MIO (EMIO) pin requirements.
    Note: Each boot mode uses a set of dedicated I/O pins or multiplexed I/O pins. The multiplexed I/O pins are then released for general use when boot is completed.
  • Ensure the boot mode selected does not place undesired voltage restrictions on peripherals sharing the MIO bank.
  • Choose suitable terminations for different PMC pins.
  • Use the recommended values of pull-up or pull-down resistors for PMC pins.

There are several boot mode options. Although the options are flexible, there is often an optimal solution for each system. Consider the following when choosing the best boot option:

  • Setup, including pin count and pin location
  • Speed
  • Cost
  • Complexity

For more information on device boot mode options, see the following:

  • This link in the Versal Adaptive SoC Technical Reference Manual (AM011)
  • This link in the Versal Adaptive SoC PCB Design User Guide (UG863)
  • Vivado Design Suite User Guide: Programming and Debugging (UG908)