Processing System Management Firmware (PSM) - 2023.2 English

PetaLinux Tools Documentation: Reference Guide (UG1144)

Document ID
Release Date
2023.2 English

This is for AMD Versalâ„¢ adaptive SoC. This is mandatory. By default, the top-level system settings are set to generate the PSM.

If you had disabled PSM from menuconfig previously, you can configure the project to build PSM as follows:

  1. Launch top level system settings configuration menu and configure:
    1. Select the Linux Components Selection submenu.
    2. Select PSM firmware.
    3. Enter your settings.
    4. Exit the menu and save the change.
  2. Build the PSM when building the project:
  3. Build the PSM only:
    petalinux-build -c psm-firmware

The PSM ELF file is installed as psmfw.elf for Versal adaptive SoC in images/Linux inside the project root directory.

For more information on PSM, see Versal Adaptive SoC System Software Developers Guide (UG1304).