Open Source Bootgen for On-target Use for Zynq Devices, Versal Adaptive SoC, and Zynq UltraScale+ MPSoC - 2023.2 English

PetaLinux Tools Documentation: Reference Guide (UG1144)

Document ID
Release Date
2023.2 English

If you want to build an open source Bootgen as part of the root file system, follow these steps.

  1. Go to the PetaLinux project: cd <plnx-proj-root>
  2. Run petalinux-config -c rootfs and select Filesystem Packages > Bootgen
  3. Run petalinux-build

    Once the target is up, you can find the Bootgen binary in /usr/bin