Testing on HW - 2023.2 English

Vitis Libraries

Release Date
2023.2 English

After the build for hardware target completes, sd_card.img file will be generated in the build directory.

  1. Use a software like Etcher to flash the sd_card.img file on to a SD Card.
  2. After flashing is complete, insert the SD card in the SD card slot on board and power on the board.
  3. Use Teraterm to connect to COM port and wait for the system to boot up.
  4. After the boot up is done, goto /media/sd-mmcblk0p1 directory and run the executable file.

Please refer to hw_run section in Vitis Unified Software Development Platform 2022.2 Documentation.