Primitive: Register Interface Unit Selection Block
- PRIMITIVE_GROUP: I/O
- PRIMITIVE_SUBGROUP: BITSLICE
- Families: UltraScale, UltraScale+
Introduction
The RIU_OR controls the Register Interface Unit selection between the lower and upper nibble BITSLICE_CONTROL within a BYTE.
Port Descriptions
Port | Direction | Width | Function |
---|---|---|---|
RIU_RD_DATA<15:0> | Output | 16 | RIU data bus to the controller. |
RIU_RD_DATA_LOW<15:0> | Input | 16 | RIU data bus from the controller to the lower nibble BITSLICE_CONTROL. |
RIU_RD_DATA_UPP<15:0> | Input | 16 | RIU data bus from the controller to the upper nibble BITSLICE_CONTROL. |
RIU_RD_VALID | Output | 1 | Combined RIU read valid signal to the controller. |
RIU_RD_VALID_LOW | Input | 1 | RIU_VALID of the lower nibble BITSLICE_CONTROL. |
RIU_RD_VALID_UPP | Input | 1 | RIU_VALID of the upper nibble BITSLICE_CONTROL. |
Design Entry Method
Instantiation | Yes |
Inference | No |
IP and IP Integrator Catalog | Yes |
VHDL Instantiation Template
Unless they already exist, copy the following
two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;
-- RIU_OR: Register Interface Unit Selection Block
-- UltraScale
-- Xilinx HDL Language Template, version 2023.1
RIU_OR_inst : RIU_OR
generic map (
SIM_DEVICE => "ULTRASCALE_PLUS" -- Set the device version for simulation functionality (ULTRASCALE,
-- ULTRASCALE_PLUS, ULTRASCALE_PLUS_ES1, ULTRASCALE_PLUS_ES2)
)
port map (
RIU_RD_DATA => RIU_RD_DATA, -- 16-bit output: RIU data bus to the controller
RIU_RD_VALID => RIU_RD_VALID, -- 1-bit output: Combined RIU read valid signal to the controller
RIU_RD_DATA_LOW => RIU_RD_DATA_LOW, -- 16-bit input: RIU data bus from the controller to the lower
-- nibble BITSLICE_CONTROL
RIU_RD_DATA_UPP => RIU_RD_DATA_UPP, -- 16-bit input: RIU data bus from the controller to the upper
-- nibble BITSLICE_CONTROL
RIU_RD_VALID_LOW => RIU_RD_VALID_LOW, -- 1-bit input: RIU_VALID of the lower nibble BITSLICE_CONTROL
RIU_RD_VALID_UPP => RIU_RD_VALID_UPP -- 1-bit input: RIU_VALID of the upper nibble BITSLICE_CONTROL
);
-- End of RIU_OR_inst instantiation
Verilog Instantiation Template
// RIU_OR: Register Interface Unit Selection Block
// UltraScale
// Xilinx HDL Language Template, version 2023.1
RIU_OR #(
.SIM_DEVICE("ULTRASCALE_PLUS") // Set the device version for simulation functionality (ULTRASCALE,
// ULTRASCALE_PLUS, ULTRASCALE_PLUS_ES1, ULTRASCALE_PLUS_ES2)
)
RIU_OR_inst (
.RIU_RD_DATA(RIU_RD_DATA), // 16-bit output: RIU data bus to the controller
.RIU_RD_VALID(RIU_RD_VALID), // 1-bit output: Combined RIU read valid signal to the controller
.RIU_RD_DATA_LOW(RIU_RD_DATA_LOW), // 16-bit input: RIU data bus from the controller to the lower
// nibble BITSLICE_CONTROL
.RIU_RD_DATA_UPP(RIU_RD_DATA_UPP), // 16-bit input: RIU data bus from the controller to the upper
// nibble BITSLICE_CONTROL
.RIU_RD_VALID_LOW(RIU_RD_VALID_LOW), // 1-bit input: RIU_VALID of the lower nibble BITSLICE_CONTROL
.RIU_RD_VALID_UPP(RIU_RD_VALID_UPP) // 1-bit input: RIU_VALID of the upper nibble BITSLICE_CONTROL
);
// End of RIU_OR_inst instantiation
Related Information
- UltraScale Architecture SelectIO Resources User Guide (UG571)