get_boards - 2023.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2023-05-16
Version
2023.1 English

Get the list of boards available in the project

Syntax

get_boards [‑regexp] [‑nocase] [‑filter <arg>] [‑of_objects <args>]
    [‑quiet] [‑verbose] [<patterns>...]

Returns

List of board objects.

Usage

Name Description
[-regexp] Patterns are full regular expressions
[-nocase] Perform case-insensitive matching
[-filter] Filter list with expression
[-of_objects] Get 'board' objects of these types: 'board_component'.
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
[<patterns>] Match Board names against patterns Default: * Values: The default search pattern is the wildcard *, or .* when -regexp is specified.

Categories

Object, Project, Board

Description

Gets a list of evaluation boards available for use by the current project.

The board file, board.xml located in the data/boards folder of the Vivado® Design Suite installation area, stores information regarding board attributes. The board provides a representation of the overall system that the Xilinx® device is a part of, and can help define key aspects of the design, such as clock constraints, I/O port assignments, and supported interfaces. You can create custom boards by defining a custom Board Interface file, as described in the Vivado Design Suite User Guide: System-Level Design Entry (UG895).

The board in use by the project is returned by the current_board_part command.

The board can be specified:

  • When the project is created by selecting Boards from the Default Part dialog box.
  • By setting the BOARD property on the current project as shown in the example.
  • By selecting the Project Device in the Settings dialog box in an open project in the Vivado IDE.

Refer to the Vivado Design Suite User Guide: System-Level Design Entry (UG895) for information on creating projects, and on configuring project settings.

Important: When you specify the board with the set_property command, the target part is also changed to match the part required by the specified BOARD property.

This command returns a list of boards that are available for use by the current project, or returns an error if it fails.

Arguments

-regexp - (Optional) Specifies that the search <patterns> are written as regular expressions. Both search <patterns> and -filter expressions must be written as regular expressions when this argument is used. Xilinx® regular expression Tcl commands are always anchored to the start of the search string. You can add ".*" to the beginning or end of a search string to widen the search to include a substring. See http://perldoc.perl.org/perlre.html for help with regular expression syntax.
Note: The Tcl built-in command regexp is not anchored, and works as a standard Tcl command. For more information refer to http://www.tcl.tk/man/tcl8.5/TclCmd/regexp.htm.

-nocase - (Optional) Perform case-insensitive matching when a pattern has been specified. This argument applies to the use of -regexp only.

-filter - (Optional) Filter the results list with the specified expression. The -filter argument filters the list of objects returned by get_boards based on property values on the boards. You can find the properties on an object with the report_property or list_property commands. Any property/value pair can be used as a filter. In the case of the board object, "NAME", "DEVICE", and "FAMILY" are some of the properties that can be used to filter results.

The filter search pattern should be quoted to avoid having to escape special characters. String matching is case-sensitive and is always anchored to the start and to the end of the search string. The wildcard “*” character can be used at the beginning or at the end of a search string to widen the search to include a substring of the property value.
Note: The filter returns an object if a specified property exists on the object, and the specified pattern matches the property value on the object. In the case of the "*" wildcard character, this will match a property with a defined value of "".
For string comparison, the specific operators that can be used in filter expressions are "equal" (==), "not-equal" (!=), "match" (=~), and "not-match" (!~). Numeric comparison operators <, >, <=, and >= can also be used. Multiple filter expressions can be joined by AND and OR (&& and ||). The following gets input pins that do NOT contain the “RESET” substring within their name:
get_pins * -filter {DIRECTION == IN && NAME !~ "*RESET*"}
Boolean (bool) type properties can be directly evaluated in filter expressions as true or not true:
-filter {IS_PRIMITIVE && !IS_LOC_FIXED}

-of_objects <args> - (Optional) Get the boards of the specified board_component objects as returned by get_board_components.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<patterns> - (Optional) Match boards against the specified search patterns. The default pattern is the wildcard '*' which gets a list of all boards available for use in the project. More than one pattern can be specified to find multiple boards based on different search criteria.

Note: You must enclose multiple search patterns in braces, {}, or quotes, "", to present the list as a single element.

Examples

The following example reports the properties of the specified evaluation board:

report_property [get_boards -filter {LIBRARY_NAME==artix7}]

The following example returns all boards matching the specified search patterns:

get_boards {*ar* *kc*}