Create a new segment.
Syntax
create_bd_addr_seg ‑range <arg> ‑offset <arg> [‑quiet] [‑verbose]
[<parent_addr_space>] [<slave_segment>] <name>
Returns
The newly created segment object, "" if failed.
Usage
Name | Description |
---|---|
-range
|
Range of segment. e.g. 4096, 4K, 16M, 1G |
-offset
|
Offset of segment. e.g. 0x00000000 |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<parent_addr_space>]
|
Parent address space of segment |
[<slave_segment>]
|
Slave segment of the created segment |
<name>
|
Name of segment to create |
Categories
Description
Create a new address segment object, bd_addr_seg, in the current IP integrator subsystem design.
This command returns the newly created master address segment object, or returns nothing if it failed.
Arguments
-range <arg>
- (Required) Range, or size, of address segment to create expressed as an integer or hexadecimal value. The range should be specified as a number of bits expressed as a power of 2, such as 4096, or as an amount of memory to allocate such as 4K, 16M, 1G.
-offset <arg>
- (Required) Offset of the address segment. Written as an integer or hexadecimal value, such as 0x00000000.
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<parent_addr_space> - (Required) Defines the parent address space of the segment.
<slave_segment>
- (Required) Maps a slave address segment of the master address segment being created.
<name>
- (Required) The name of the master address segment to create.
Example
The following example creates address segments for the Data and Instruction address spaces of the Microblaze core:
create_bd_addr_seg -range 0x10000 -offset 0x41200000 \
[get_bd_addr_spaces microblaze_1/Data] \
[get_bd_addr_segs microblaze_1_axi_intc/s_axi/Reg] SEG1
create_bd_addr_seg -range 0x40000000 -offset 0x0 \
[get_bd_addr_spaces microblaze_1/Instruction] \
[get_bd_addr_segs microblaze_1_local_memory/ilmb_bram_if_cntlr/SLMB/Mem] \
SEG1