Close a design.
Syntax
close_bd_design [‑quiet] [‑verbose] <name>Returns
The design object, "" if failed.
Usage
| Name | Description |
|---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<name>
|
Name of design to close |
Categories
Description
Closes the specified IP subsystem design in the IP integrator of the Vivado® Design Suite.
If the design has been modified, you will not be prompted to save the design prior to closing. You will need to run save_bd_design to save any changes made to the design before using the close_bd_design command.
Arguments
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config command.
<name> - The name of the IP subsystem design object to close.
Example
The following example closes the current IP subsystem design in the current project:
close_bd_design [current_bd_design]