The Device Estimation Overview section of the Power Design shows you the current selected device including the Voltage, Static Screen, Temperature grade and so on=. The power delivery should be designed for the worst-case power estimation, meaning the maximum process with PS and PL domains fully active.
Figure 1. Device Overview
Process
Process can be changed from Summary page. At present, PDM does not allow changing process from the Power Design.
Recommended: The power supply should be
specified for the worst-case scenario. This means that the Maximum process must be
set and the Junction temperature should be
set based on the thermal simulation result. If that is not available, it is
recommended to set the Junction temperature
to the maximum for the device temperature range.