Boot Levels for Prebuilt Option - 2023.1 English

PetaLinux Tools Documentation: Reference Guide (UG1144)

Document ID
UG1144
Release Date
2023-05-16
Version
2023.1 English

--prebuilt <BOOT_LEVEL> boots prebuilt images (override all settings). Supported boot levels are 1 to 3. The command for JTAG boot:

petalinux-boot --jtag --prebuilt <BOOT_LEVEL> --hw_server-url hostname:3121

The command for the QEMU boot is as follows:

petalinux-boot --qemu --prebuilt <BOOT_LEVEL>
Note: The QEMU boot does not support BOOT_LEVEL 1.
  • Level 1: Download the prebuilt FPGA bitstream.
    • It boots FSBL and PMU firmware for AMD Zynq™ UltraScale+™ MPSoC.
    • It boots FSBL for Zynq 7000 devices.
  • Level 2: Download the prebuilt FPGA bitstream and boot the prebuilt U-Boot.
    • For Zynq 7000 devices: It boots FSBL before booting U-Boot.
    • For Zynq UltraScale+ MPSoC: It boots PMU firmware, FSBL, and TF-A before booting U-Boot.
    • For AMD Versal™ devices: It loads the required cdo files from .pdi file, PLM, PSM firmware, and TF-A before booting U-Boot.
  • Level 3: Download and boot the prebuilt Linux
    • For MicroBlaze™ processors: Downloads the prebuilt FPGA bitstream and boots the prebuilt kernel image on target.
    • For Zynq 7000 devices: Downloads the prebuilt FPGA bitstream and FSBL, boots the prebuilt U-Boot, and boots the prebuilt kernel on target.
    • For Zynq UltraScale+ MPSoC: Downloads prebuilt FPGA bitstream, prebuilt FSBL, prebuilt PMU firmware, prebuilt TF-A, prebuilt U-Boot and prebuilt kernel on target.
    • For Versal devices: It loads the required cdo files from .pdi file, PLM, PSM firmware, TF-A, and U-Boot before booting Kernel.

Example to show the usage of boot level for prebuilt option:

petalinux-boot --jtag --prebuilt 3