The AMD Fat File System (FFS) library consists of a file system and a glue layer.
This FAT file system can be used with an interface supported in the glue layer. The file system code is open source and is used as it is. Currently, the Glue layer implementation supports the SD/eMMC interface and a RAM based file system. Application should make use of APIs provided in ff.h. These file system APIs access the driver functions through the glue layer.
The file system supports FAT16, FAT32, and exFAT (optional). The APIs are standard file system APIs. For more information, see http://elm-chan.org/fsw/ff/00index_e.html
Note: The XilFFS library uses R0.15 w/patch1 of the generic FAT filesystem
module.
Library Files
The table below lists the file system files.
The table below lists the glue layer files.
| File | Description |
|---|---|
| ff.c | Implements all the file system APIs |
| ff.h | File system header |
| ffconf.h | File system configuration header – File system configurations such as READ_ONLY, MINIMAL, can be set here. This library uses FF_FS_MINIMIZE and FF_FS_TINY and Read/Write (NOT read only) |
| File | Description |
|---|---|
| diskio.c | Glue layer – implements the function used by file system to call the driver APIs |
| ff.h | File system header |
| diskio.h | Glue layer header |