XSem_Ssit_CmdCfrInit - 2023.1 English

Standalone Library Documentation: BSP and Libraries Document Collection (UG643)

Document ID

UG643

Release Date

2023-05-16

Version

2023.1 English

This function is used to initialize CRAM scan on targeted SLR from user application. Primarily this function sends an IPI request to PLM to start CRAM Scan Initialization, waits for PLM to process the request and reads the response message.

Prototype

XStatus XSem_Ssit_CmdCfrInit(XIpiPsu *IpiInst, XSemIpiResp *Resp, u32 TargetSlr);

Parameters

The following table lists the XSem_Ssit_CmdCfrInit function arguments.

Table 1. XSem_Ssit_CmdCfrInit Arguments
Type	Member	Description
XIpiPsu *	IpiInst	Pointer to IPI driver instance
`XSemIpiResp` *	Resp	Structure Pointer of IPI response Resp->RespMsg1: Acknowledgment ID of CRAM Initialization(0x10301) Resp->RespMsg2: if Broadcast Status of Cfr Init in Master else : Status of Cfr Init in Target SLR RespMsg3, 4 and 5 are updated only in case of broadcast Resp->RespMsg3: Status of CfrInit in Slave 1 Resp->RespMsg4: Status of CfrInit in Slave 2 Resp->RespMsg5: Status of CfrInit in Slave 3 Status of CRAM initialization: 0x01000000U - ECC/CRC error detected during calibration in case of SWECC 0X00000080U - Calibration timeout 0X00002000U - Internal error
u32	TargetSlr	Target SLR index on which command is to be executed 0x0 : Target is master only 0x1 : Target is slave 0 only 0x2 : Target is slave 1 only 0x3 : Target is slave 2 only 0xF : Broadcast for all devices

Returns

This API returns the success or failure.

XST_FAILURE: On CRAM Initialization failure
XST_SUCCESS: On CRAM Initialization success