Customizing lwIP API Mode - 2023.1 English

Standalone Library Documentation: BSP and Libraries Document Collection (UG643)

Document ID
UG643
Release Date
2023-05-16
Version
2023.1 English

The lwip213 supports both raw API and socket API:

  • The raw API is customized for high performance and lower memory overhead. The limitation of raw API is that it is callback-based, and consequently does not provide portability to other TCP stacks.
  • The socket API provides a BSD socket-style interface and is very portable; however, this mode is not as efficient as raw API mode in performance and memory requirements. The lwip213 also provides the ability to set the priority on TCP/IP and other lwIP application threads.

The following table describes the lwIP library API mode options.

Table 1. lwIP library API mode options
Attribute Description Type Default
api_mode {RAW_API | SOCKET_API} The lwIP library mode of operation enum RAW API
socket_mode_thread_prio Priority of lwIP TCP/IP thread and all lwIP application threads. This setting applies only when Xilkernel is used in priority mode. It is recommended that all threads using lwIP run at the same priority level. For GigE based Zynq-7000, Zynq UltraScale+ MPSoC, and Versal systems using FreeRTOS, appropriate priority should be set. The default priority of 1 will not give the expected behavior. For FreeRTOS (Zynq 7000, Zynq UltraScale+ MPSoC, and Versal adative SoC systems), all internal lwIP tasks (except the main TCP/IP task) are created with the priority level set for this attribute. The TCP/IP task is given a higher priority than other tasks for improved performance. The typical TCP/IP task priority is 1 more than the priority set for this attribute for FreeRTOS. integer 1
use_axieth_on_zynq In the event that the AxiEthernet soft IP is used on a Zynq 7000 device or a Zynq UltraScale+ MPSoC. This option ensures that the GigE on the Zynq 7000 PS (EmacPs) is not enabled and the device uses the AxiEthernet soft IP for Ethernet traffic. The existing AMD provided lwIP adapters are not tested for multiple MACs. Multiple Axi Ethernet's are not supported on Zynq UltraScale+ MPSoCs. integer

0 = Use Zynq 7000 PS-based or Zynq UltraScale+ MPSoC PS-based GigE controller

1= User AxiEthernet