To build and test the design on Linux platform, please make sure your XILINX_VITIS and XILINX_XRT environment variables are set up correctly and point to the corresponding Vitis 2022.2 locations. Once your environment is set up properly, please navigate to the L2/tests/fp64/spmv directory and follow the steps below to run emulation and launch accelerator on Alveo U280.
- To run hardware emulation, please enter following commands. Please replace the $XILINX_VITIS with your Vitis 2022.2 installation location.
make cleanall make run PLATFORM_REPO_PATHS=$XILINX_VITIS/platforms PLATFORM=xilinx_u280_xdma_201920_3 TARGET=hw_emu
- To build and launch the hardware accelerator on the Alveo U280, please enter following commands. Please replace the $XILINX_VITIS with your Vitis 2022.2 installation location.
make cleanall make run PLATFORM_REPO_PATHS=$XILINX_VITIS/platforms PLATFORM=xilinx_u280_xdma_201920_3 TARGET=hw