- Work Directory(Step 1)
The steps for library download and environment setup can be found in l2_vitis_graph. For getting the design,
cd L2/benchmarks/connected_component
- Build kernel(Step 2)
Run the following make command to build your XCLBIN and host binary targeting a specific device. Please be noticed that this process will take a long time, maybe couple of hours.
make run TARGET=hw PLATFORM=xilinx_u250_xdma_201830_2
- Run kernel(Step 3)
To get the benchmark results, please run the following command.
./build_dir.hw.xilinx_u250_xdma_201830_2/host.exe -xclbin build_dir.hw.xilinx_u250_xdma_201830_2/wcc_kernel.xclbin -o data/test_offset.csr -c data/test_column.csr -g data/test_golden.mtx
Connected Component Input Arguments:
Usage: host.exe -[-xclbin -o -c -g] -xclbin connected component binary -o offset file of input graph in CSR format -c edge file of input graph in CSR format -g golden reference file for validatation
Note: Default arguments are set in Makefile, you can use other Datasets listed in the table.
- Example output(Step 4)
---------------------WCC Test---------------- Found Platform Platform Name: Xilinx INFO: Found Device=xilinx_u250_xdma_201830_2 INFO: Importing build_dir.hw.xilinx_u250_xdma_201830_2/wcc_kernel.xclbin Loading: 'build_dir.hw.xilinx_u250_xdma_201830_2/wcc_kernel.xclbin' INFO: kernel has been created INFO: kernel start------ INFO: kernel end------ INFO: Execution time 53.697ms INFO: Write DDR Execution time 0.11773ms INFO: Kernel Execution time 53.198ms INFO: Read DDR Execution time 0.049562ms INFO: Total Execution time 53.3653ms ============================================================