Primitive: General Clock Mux Buffer with Output State 1
- PRIMITIVE_GROUP: CLOCK
- PRIMITIVE_SUBGROUP: MUX
- Families: UltraScale, UltraScale+
Introduction
This design element is a general clock buffer, based off of the BUFGCTRL,
that can select between two input clocks, I0 and I1. When the select
input (S) is Low, the signal on I0 is selected for output (O). When the
select input (S) is High, the signal on I1 is selected for output. BUFGMUX
BUFGMUX_1 are distinguished by the state the output assumes when that
output switches between clocks in response to a change in its select input.
BUFGMUX assumes output state 0 and BUFGMUX_1 assumes output state 1.
Logic Table
Inputs |
Outputs |
I0 |
I1 |
S |
O |
I0 |
X |
0 |
I0 |
X |
I1 |
1 |
I1 |
X |
X |
↑ |
1 |
X |
X |
↓ |
1 |
Port Descriptions
Port |
Direction |
Width |
Function |
I0 |
Input |
1 |
Clock buffer input. This input is reflected on the output O when the S input is zero. |
I1 |
Input |
1 |
Clock buffer input. This input is reflected on the output O when the S input is one. |
O |
Output |
1 |
Clock buffer output. |
S |
Input |
1 |
Clock buffer select input. When Low, selects the I0 input and when High, selects the I1 input. |
Design Entry Method
Instantiation |
Yes |
Inference |
No |
IP and IP Integrator Catalog |
No |
Available Attributes
Attribute |
Type |
Allowed Values |
Default |
Description |
CLK_SEL_TYPE |
STRING |
"SYNC", "ASYNC" |
"SYNC" |
Specifies synchronous (glitch-free) or asynchronous clock switching. |
VHDL Instantiation Template
Unless they already exist, copy the following
two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;
-- BUFGMUX_1: General Clock Mux Buffer with Output State 1
-- UltraScale
-- Xilinx HDL Language Template, version 2022.2
BUFGMUX_1_inst : BUFGMUX_1
generic map (
CLK_SEL_TYPE => "SYNC" -- ASYNC, SYNC
)
port map (
O => O, -- 1-bit output: Clock output
I0 => I0, -- 1-bit input: Clock input (S=0)
I1 => I1, -- 1-bit input: Clock input (S=1)
S => S -- 1-bit input: Clock select
);
-- End of BUFGMUX_1_inst instantiation
Verilog Instantiation Template
// BUFGMUX_1: General Clock Mux Buffer with Output State 1
// UltraScale
// Xilinx HDL Language Template, version 2022.2
BUFGMUX_1 #(
.CLK_SEL_TYPE("SYNC") // ASYNC, SYNC
)
BUFGMUX_1_inst (
.O(O), // 1-bit output: Clock output
.I0(I0), // 1-bit input: Clock input (S=0)
.I1(I1), // 1-bit input: Clock input (S=1)
.S(S) // 1-bit input: Clock select
);
// End of BUFGMUX_1_inst instantiation