BUFMR - 2022.2 English

Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2022-10-19
Version
2022.2 English

Primitive: Multi-Region Clock Buffer

Introduction

The BUFMR is a multi-region clock-in/clock-out buffer. The BUFMR replaces the multi-region/bank support of the BUFR and BUFIO available in prior Virtex architectures. There are two BUFMRs in every bank and each buffer can be driven by one specific MRCC in the same bank. The BUFMRs drive the BUFIOs and/or BUFRs in the same region/banks and in the region above and below via the I/O clocking backbone. Do not use a BUFMR when driving BUFRs using clock dividers (not in bypass), but instead use a BUFMRCE component.

Port Descriptions

Port Direction Width Function
I Input 1 BUFMR clock input pin. Connect to an IBUF input that in turn is directly connected to a MRCC I/O port.
O Output 1 BUFMR clock output pin. Connect to BUFIOs and/or BUFRs to be driven in adjacent regions.

Design Entry Method

Instantiation Yes
Inference No
IP Catalog No
Macro support No

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- BUFMR: Multi-Region Clock Buffer
--        7 Series
-- Xilinx HDL Language Template, version 2022.2

BUFMR_inst : BUFMR
port map (
   O => O, -- 1-bit output: Clock output (connect to BUFIOs/BUFRs)
   I => I  -- 1-bit input: Clock input (Connect to IBUF)
);

-- End of BUFMR_inst instantiation

Verilog Instantiation Template


// BUFMR: Multi-Region Clock Buffer
//        7 Series
// Xilinx HDL Language Template, version 2022.2

BUFMR BUFMR_inst (
   .O(O), // 1-bit output: Clock output (connect to BUFIOs/BUFRs)
   .I(I)  // 1-bit input: Clock input (Connect to IBUF)
);

// End of BUFMR_inst instantiation

Related Information

  • See the 7 Series FPGAs Clocking Resource User Guide (UG472).