In this lab, you have created a new Vivado® Design Suite project, added HDL design sources, added IP from the Xilinx® IP catalog and generated IP outputs needed for simulation, and then run behavioral simulation on the elaborated RTL design.
This concludes Lab 1. You can continue Lab 2 at this time by starting at Step 2: Displaying Signal Waveforms.
You can also close the simulation, project, and the Vivado IDE to start Lab 2 at a later time.
- Click to close the open simulation.
- Select OK if prompted to confirm closing the simulation.
- Click to close the open project.
- Click to exit the Vivado tool.