After generating the IBERT IP core, it appears in the Sources window as ibert_7series_gtx or something similar. To generate the
example design, right-click the IBERT IP in the Sources window and select Open IP Example Design, then specify the desired location
of the example design project in the resulting dialog window. This command opens a new
Vivado project window for the example design and
adds the proper top-level wrapper and constraints file to the project, as shown in the
following figure.
Important: Modification of the IBERT IP example design is
not reccomended and may result in functional issues when interacting with the IBERT
IP core in hardware.
Once the example design is generated, you can implement the IBERT example design through bitstream creation core by clicking Generate Bitstream in the Program and Debug section of the Vivado IDE flow navigator or by running the following Tcl commands:
launch_runs impl_1 -to_step write_bitstream
wait_on_run impl_1Refer to the Vivado Design Suite User Guide: Design Flows Overview (UG892) for more details on the various ways you can implement your design.
Figure 1. IBERT Example Design
