If you want to access the AXI block RAM Controller from microblaze_1
, you can exclude the other slaves from the microblaze_1
memory space. This can be done in the
Address
Editor
window. As can be seen in the following figure, the microblaze_1
memory space has three unmapped slaves.
Figure 1. microblaze_1 Memory Map

- Assign
addresses to all the unmapped slaves by selecting them, right-clicking, and
selecting Assign Address from the context
menu.
- Exclude
the unwanted slaves from the memory map of
microblaze_1
by selecting them in the Address Editor window, right-clicking, and selecting Exclude Segment, as shown in the following figure.
The Address Editor window now looks as follows.
After you complete the design in this way, the rest of the design flow is the same as any other Block design flow.