- In the Flow navigator panel, under IP Integrator, click the Create Block Design button to open the Create Block Design dialog box.
- Type the Design Name, as shown in the following figure.
The Block Design window opens, as shown in the following figure.
- Within the empty design, use either the Add
IP button
on the design
canvas, or right-click in the canvas, and select Add
IP. A Search box opens to let you search for and select the MicroBlaze processor, as shown in the following figure.
When you couble-click the MicroBlaze IP, the Vivado IP integrator adds the IP to the design, and a graphical representation of the processing system displays, as shown in the following figure.
Note: The Tcl command is as follows:create_bd_cell -type ip -vlnv xilinx.com:ip:microblaze:11.0 microblaze_0 - Double-click the MicroBlaze IP in the canvas to invoke the Re-customize IP process, which displays the Re-customize IP dialog box for the MicroBlaze processor, shown in the following figure.