Vector Assert - 2022.2 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2023-01-13
Version
2022.2 English

The Vector Assert block asserts a user-defined sample rate and/or type on Vector inputs.

Hardware notes: In hardware this blocks costs nothing.

Block Parameters

The block parameters dialog box can be invoked by double-clicking the icon in your Simulink® model.

Parameters specific to this block are as follows:

Type
Assert type
Specifies whether or not the block will assert that the type at its input is the same as the type specified. If the types are not the same, an error message is reported.
Specify type
Specifies whether or not the type to assert is provided from a signal connected to an input port named type or whether it is specified explicitly from parameters in the Assert block dialog box.
Output Type
Specifies the data type of the output. Can be Boolean, Fixed-point, or Floating-point.
Arithmetic Type
If the Output Type is specified as Fixed-point, you can select Signed (2’s comp) or Unsigned as the Arithmetic Type.
Fixed-point Precision
Number of bits
Specifies the bit location of the binary point of the output number, where bit zero is the least significant bit.
Binary point
Position of the binary point in the fixed-point output.
Floating-point Precision
Single
Specifies single precision (32 bits).
Double
Specifies double precision (64 bits).
Custom
This block is listed in the following: Activates the field below so you can specify the Exponent width and the Fraction width.
Exponent width
Specify the exponent width.
Fraction width
Specify the fraction width.
Rate
Assert rate
specifies whether or not the block will assert that the rate at its input is the same as the rate specified. If the rates are not the same, an error message is reported.
Specify rate
Specifies whether or not the initial rate to assert is provided from a signal connected to an input port named rate, or whether it is specified explicitly from the Sample rate parameter in the Assert block dialog box.
Provide output port
Specifies whether or not the block will feature an output port. The type and/or rate of the signal presented on the output port is the type and/or rate specified for assertion.
Super Sample Rate (SSR)
Use this configurable GUI parameter to control processing of multiple data samples on every sample period. This block enables 1-D vector data support for the primary block operation.

Other parameters used by this block are explained in the topic Common Options in Block Parameter Dialog Boxes.

The Output type parameter in this block uses the same description as the Arithmetic Type described in the topic Common Options in Block Parameter Dialog Boxes.

The Vector Assert block does not use a Xilinx LogiCORE™ ™ and does not use resources when implemented in hardware.