The following tips will help you with your waveform analysis using the Vitis Model Composer model and the Waveform Viewer:
- Keep the Waveform Viewer open during a Model Composer session. Do not close the Waveform Viewer between each simulation.
- If you select a group of signals in the Waveform Viewer, all of the signals in the group will be cross-probed from the Waveform Viewer to the Model Composer model.
- To add multiple signals in your Model Composer model to the Waveform Viewer display, you can press and hold the left mouse button and drag the mouse to draw a box around the signals, selecting them. Then right-click one of the selected signals and select Xilinx Add to Viewer in the right-click menu. The selected signals will be added to the Waveform Viewer display.
- When naming an output signal for a block in your Model Composer model, avoid using the reserved characters shown in the table below. These are reserved characters in VHDL or Verilog. If your model does contain a signal with a reserved character, its name will be changed in the Waveform Viewer display according to the following mapping table.
Reserved Character | Mapped To |
---|---|
( | #1 |
) | #2 |
[ | #3 |
] | #4 |
. | #5 |
, | #6 |
: | #7 |
\ | #8 |