Step 4: Compile the Accelerator Model (IP Catalog Flow) to Create a Complete Design - 2022.2 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2023-01-13
Version
2022.2 English

You can now use the IP catalog compilation flow to create a complete design. When you double-click the Vitis Model Composer Hub block in IP catalog flow and click the Settings button, the Use Plug-in project directory must point to the Vivado® IP integrator project from which the design was imported (see below). When you click the Generate button, a new Vivado project based on the original Vivado platform framework/system plus the accelerator IP created in Model Composer, along with a software driver, will be created. This project will be located in an ip_catalog directory under the Model Composer Hub block's Code directory, and can also be placed into a common IP repository.

Figure 1. Target Directory

You can open this new project in Vivado to complete the implementation of your design. The block highlighted in the following figure indicates a block developed using Model Composer HDL Blockset.

Figure 2. New Project